Fyne Audio introduces Vintage and Vintage Classic speaker lines

The English company Fyne Audio has announced a series of acoustics Vintage: divided into two lines: Vintage and Vintage Classic. The first is said to have been developed by Dr. Paul Mills. It is stylized as prestigious vintage furniture - these are acoustically calibrated cabinets made of birch plywood. They are finished in premium walnut veneer with curly maple veneer inlays and gold anodized metal trim.

The Vintage series consists of three models - Vintage Ten, Vintage Twelve: and Vintage Fifteen. They are equipped with proprietary Fyne IsoFlare drivers with a diameter of 250 mm, 300 mm, and 380 mm, emulating a point source. Each is powered by a 75mm tweeter with a titanium compression diaphragm and a neodymium magnet system, combined with a rigid fi

In Vintage crossovers, audiophile components were used: assembled by hand on a special board, and even deep-cooled. At low frequencies, the Fyne BassTrax bass-reflex system works with a 360-degree return. To fine-tune the sound, you can use the Presence dial on the front panel and the HF Energy control on the back.

The Vintage Classic uses more traditional wide rectangular cabinets: The natural walnut veneer finish combined with the black front panel is reminiscent of the speakers from the 1960s and 70s and is paired with gray detachable grills. The Vintage Classic models will be equipped with a similar Fyne IsoFlare driver with a diameter of 200 mm, 250 mm, or 300 mm, also with a 75 mm titanium compression tweeter, but with a ferrite magnet. The Vintage Classic line will be represented by four models - one rack-mounted and three floor-standing.

The release of the new Fyne Audio Vintage is scheduled for autumn 2022: The Vintage Ten, Vintage Twelve + Classic X, and Classic XII models shown at the Munich High-End show will go on sale first, followed by the 8-inch Classic and Vintage Fifteen models.